AGR Tank - Stainless
New Improved orings for better fit, this is the updated version of the AGR tank.
Awesome Stainless Tank from the makers of the AGA Tiamat and other RBAs!
Now they have one for your cartos.
Fits both Boge and Smoktech replacements, you can use Boges and punch your own holes or use our Smotech Pre-holed No Flange Tank replacements (in the Tank section to the left)
It comes with a threaded stainless steel top cap with a filler screw. Threaded Poly Tanks (2 sizes, one for the standard Boge and one for standard Smoktechs & Boge XLs) The bottom is also threaded and has a sepecial design that lets the carto it in nice and tight and easy to get off. The bottom tank piece screws in but there is another piece that is the true bottom that you put the end of the carto in to screw it all together. This way there are no leaks out the bottom because you can't accidently pull the cartos out the bottom, so no more leaks.
The top has a fill hole you can unscrew for no more mess or pressure spills, again, no more leaks and no air pressure problems. You can also remove the top to fill if you like.
There are grooves on the connector piece for maximum airflow on any device it's attached to.
I full AGR, Top Cap, 2 tanks, bottom cap and 510 carto seat conector (see pictures) This does not come with a carto, the pictures are for illustration only.
Please Note: The Video review is not mine, it is from a customer. Also the other tank (the UDT) in the review below is called the Artemas tank here on the website.
This does not come with the cartomizer, you need to purchase your desired cartomizer seperately.
Showing reviews 1-20 of 28 | Next
Posted by Tadeus on 1st Aug 2013
I'm using this tank now 3-4 weeks with a Terminator (recoiled to 1.2OHMS) from Smoktech connected to the KTS and can just say, a perfect fit. adjusting the flow on the Terminator with this tank is a charm. I wish AGR would come up with some replacement tubes made of a different material. Even stainless Steel would elevate the whole value....
Posted by Andre Croy on 11th Jul 2013
After a rough start by screwing up with punching a carto, I finally got it all worked out. Been using it flawlessly. Fills so much easier than my Smok DCT! I just wish they had a glass version.
Posted by Paul on 8th Jul 2013
Use to vape a BCC, but now I'm hooked on this. Hardly use the XL tank (Vamo becomes a Lite-Saber) Also, the previous thread (Be patient) is true. I also found that filling from the tap requires a longer filler stem on the bottle. Pressing the bottle snug against the fill hole will flood it.
Posted by Danjo61 on 1st Jul 2013
I read some negative reviews but that didn't sway me. I remove screw, unscrew tank top and fill. I put the screw back on to tighten tank only.....This AGR tank ROCKS!!
Posted by JaysonC on 1st Jul 2013
Flooded-Flooded and Flooded!Brought it to the near vapor shop and they could never get it to work. they've use several Cartos and failed!!! i'll pass on this tank!!
Posted by Unknown on 28th Jun 2013
All I can say was a very fast shipping!
Posted by Unknown on 16th Jun 2013
This tank will flood if your not patient. I learned to fill it and then screw on the top WITHOUT the fill tap in. Once it is on then I screw in the little fill tap and that fixed my flooding issue
Posted by Unknown on 14th Jun 2013
I loved this tank so far. Currently need to buy new cartos for it but the tank its self holds up really well, great design and easy to use.
Posted by Johnathan on 8th Jun 2013
I bought 2 of these tanks and have to say I am very happy with them. I have not had any issues with leaking or flooding. I do not try and fill the tank through the top hole. I use it as a vent and fill it like a ViVi Nova. I single punched a couple 3 Ohm Boge cartos, primed them and filled the tank with some 50/50. Love the taste and amount of Vapor I’m getting. If you’re into cartos these tanks have a great build quality.
Vapes like a champ
Air slots on the base
Vent hole for filling
Carto locks in place
Includes 2 tanks for both 510 and XL cartos
Top screw limits the drip tips you can use
Extremely big when using Xl cartos
Posted by Unknown on 26th Mar 2013
will buy a few more of these. good price and work great
Posted by Unknown on 25th Mar 2013
I saw a YouTube video saying it was a good device. So I decided to buy 2 of them after I put the cartomizer in locked it very tight about 2 hours later I had a puddle of juice so I took the second 1 in did the same thing same thing happened Puddle of juice. So I spent somewhere around 25 ish on the 2 so I'm out 25 dollars well I use them yes I have to go to Lowes or Home Depot and get different o-rings can go around a cartomizer so if you want to spend 25 dollars on to that you have to buy new arrange for go right ahead
Posted by Ace on 25th Mar 2013
Love Discount Vapors. Still waiting for the verdict on this product. Construction is great. It is changing the taste of my juice so I dont think it is stainless steel, or it is a low grade stainless. Still use it every day, but I am tending to favor the Delrin tanks.
Posted by R. R. MD USA on 23rd Mar 2013
I have 2 of these tanks and have been using them for over a week. So far I have not had any problems that can be attributed to the tank itself. I had a carto leak one and that was caused by wrong technique when filling it. At this price, it is a great little tank. Getting a few more when available.
Posted by Woody on 23rd Mar 2013
I didn't think I would switch back to carto's but this tank is great. No leakage whatsoever and very easy to fill with just a needle capped bottle. And they look sharp also with the stainless top and bottom. Need more Boge carto's!
Posted by Dirtyfnhippy on 23rd Mar 2013
This is a great tank. Not quite vaping nirvana but a step in the right direction for cargo tanks. I would like to see it with a glass tank but anyway I would buy another
Posted by Jerry Belanger on 22nd Mar 2013
Love the looks and idea of this type of tank, but mine leaks like crazy and yes I am using the bottom piece. Left it in a shot glass upside down over night and all the juice leaked out past the top o-ring. The problem is sloppy fitting o-rings plain and simple. Well maybe not so simple because I can't find any locally that will fit and no idea what size to order online that will give a good seal. Without a good airtight seal you wont get any vacume in the tank to prevent your juice from flowing into the punched holes nonstop and right out the 510 connection. I can't believe these tanks actually shipped from the factory with the included o-rings. I believe that with proper o-rings this could be one of the best tanks out there.
Posted by Larry on 22nd Mar 2013
I purchased one of these because I needed a tank that would work with Boge short Cartos. This thing is Awesome. I have used it with short and long Boge cartos and it never leaks, and works great every day. Day after day. It is my most favorite Tank... Period. I have many other tanks, and I do like them if I use a SmokeTek carto, but I like Boge cartos better.
If you are looking for a great tank that uses cartos without a flange on the bottom, This is the tank for you. I will be buying another one as soon as they are back in stock.
Posted by Jarne Skegge on 19th Mar 2013
This is a GREAT TANK!
I was excited to get this. Opened it, put it together with a brand new carto and it leaked bad. Turned out there was a tiny hole in the center sleeve of my carto. It looked like the tank was leaking, because it dripped out through the air vents in the tank, but it turned out it was coming from the bottom of my carto.
I put in a new carto-was careful not to flood it, and it worked great. Not a drop leaked.
Another thing that can happen (see pbusardos review) is if you fill through the screw hole, your needle or tip can not be so big that it fills the entire hole. Why? because unless there is room for air to come up out of that hole while filling you will essentially be pressurizing the tank area- this will force juice into your carto way to fast, and it will leak all over.
I fill these the easy way-I take off the top cap, fill it, and screw the cap back on with the fill-hole screw removed (letting air escape) then I replace the screw- no worries mate!
Posted by Unknown on 19th Mar 2013
I bought two of these after seeing some good reviews, one of them posted above. Got them yesterday (March 18th 2013) and immediately went to fill them both using the Smoktek No Flange Single Coil Cartomizers I ordered also. My juice leaked everywhere... So I took my second tank and a new carto... This one leaked all over the place as well... I only ordered 2 XL cartos from DV and both were leaking.... So I took a fresh 5-pack of boge cartos and used 4 of them trying to not get a leak. I finally gave up.. 6 cartos and 10ml leaked juice later I give up.... Dont waste your money.
Yes I used the bottom piece... Yes I know how to use a carto tank... I usually use a UDCT.
I left my tank sitting in a shot glass last night after my last attempt. There was a bit of juice that hadnt leaked out yet. By the morning all the juice in this tank had leaked out. Im so pissed to have wasted 40 bucks on this junk.
Posted by Hazozita on 15th Mar 2013
Love the looks and the overall concept of this tank. However, for some reason every carto I've tried just floods big time.
It's not a fill port issue -- it floods during use. Tried a number of cartos, all with the same problem. To narrow the issue down to the tank, I took a carto out of this tank and put it in a different tank with the same juice. No flooding.
Has potential, but too many problems at this time to recommend it.
Showing reviews 1-20 of 28 | Next