Loading... Please wait...

August 8th 2016 FDA Rules change for all Vaping Retailers is now in effect.
We are required to age check BY LAW, this will happen after checkout and you will not notice any changes. We are now using Veratad. If you do not automatically age verify we will contact you via email before shipping your order, this may delay shipping. For more information, click here.

    Please note:
    In order to limit exposure to Covid-19 for our staff and family, we are temporarily adjusting our shipping schedule. The updated schedule can be found on our Shipping/Returns link above.
We apologize for any inconvenience.

Our Newsletter

AnyVape Davide BDC Mini Glassomizer - NEW Version!

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
Calculated at checkout
Minimum Purchase:
1 unit(s)
Maximum Purchase:
4 unit(s)
Current Stock:

Product Description

AnyVape Mini Davide Glassomizer


Aspire Coils fit this tank!  ProTank and Evod coils will also fit this tank,  it takes BOTH!
This new Davide Mini has a new base piece that works with the aspire coils, this is installed by default and the box comes with Aspire coils.
If you want to use Kanger coils you only need to remove the upper base (see pictures)

eGo threaded
Tube Locking System

All Parts Changeable
No Glue
Up to 1.6ml Capacity (when filled vertically, slightly less filled at an angle)
Bottom Coils for better wicking
Cleans easily with the removable parts
Compatable with eGo Series Batteries, Mods.
It has a deep well so may not be suitable for 510 mods without an ego adapter


1 x Glassomizer
1 x Drip Tip

2 x Aspire Coil Heads (Note they are not marked, you will receive 1.8 or 2.1 it is not selectable)
1 x eGo battery adaptor (this is just the base it uses, nothing "extra")
Extra Oring sets, for the glass, the inner post and base.


Eric's Notes:

Clean all parts before using, the glass, the base and the top!  Please be careful with this tank, it is made of glass and can shatter and break if dropped.  Breakage of the tank is not warrantied. Replacement glass tops will be available soon for purchase. Filling this unit is different from the protank as this unit has guards on the base, so you would fill with a dripper, syringe or bottle carefully into the sloted holes and not just dump in it.

Also, the eVod and ProTank coils work on this unit as will the aspires.  
When building this tank or removing parts, please be sure to clean and dry all parts.  When rebuilding the center tube make sure the center tube is on properly and tight, not having it all put together properly will result in leaking. Do not overtighten the top or bottom base, finger tight is good. I grasp the top and bottom with both hands (one on top the other on the base) and twist slowly until it stops, it does not need to be tightened more than that, over tightening can cause breakage. Glass Breakage is not covered under any warranty. 

The glass tanks that are coming out of China recently require a little finese in usage, do not store  in pockets, try not to drop them and be careful putting them back together.

Eric's Review:
This is the best of both worlsd, one device that takes both kanger protank/evod coils and the aspire coils.



Find Similar Products by Category

Add to Wish List

Click the button below to add the AnyVape Davide BDC Mini Glassomizer - NEW Version! to your wish list.

You Recently Viewed...