AnyVape Mini Davide Glassomizer
ProTank and Evod coils will fit and work with this tank!
(see Eric's review notes below)
Tube Locking Systerm
All Parts Changeable (especially glass tube & drip tip)
2.0ml Capacity (when filled vertically, slightly less filled at an angle)
Bottom Coils for better wicking
Cleans easily with the removable parts
Compatable with eGo Series Batteries, Mods.
It has a deep well so may not be suitable for 510 mods without an ego adapter
1 x Glassomizer
1 x Drip Tip
2 x extra Davide Glassomizer Coil Heads (Note they are not marked but AnyVape has been sending out 2.0-2.6ohms)
1 x eGo battery adaptor (this is just the base it uses, nothing "extra")
Clean all parts before using, the glass, the base and the top! Please be careful with this tank, it is made of glass and can shatter and break if dropped. Breakage of the tank is not warrantied. Replacement glass tops will be available soon for purchase. Filling this unit is different from the protank as this unit has guards on the base, so you would fill with a dripper, syringe or bottle carefully into the sloted holes and not just dump in it.
Also, the eVod and ProTank coils work on this unit. When building this tank or removing parts, please be sure to clean and dry all parts. When rebuilding the center tube make sure the center tube is on properly and tight, not having it all put together properly will result in leaking. Do not overtighten the top or bottom base, finger tight is good. I grasp the top and bottom with both hands (one on top the other on the base) and twist slowly until it stops, it does not need to be tightened more than that, over tightening can cause breakage. Glass Breakage is not covered under any warranty.
The glass tanks that are coming out of China recently require a little finese in usage, do not store in pockets, try not to drop them and be careful putting them back together.
This is basically like a mini protank that can be dissasembled, it seems to be contructed well, the glass is nice and it all comes apart even the center stem, there are parts due from AnyVape that are supposed to make this even bigger if you want it to be. Not sure on the ohms included as they seem to be random. This is slightly annoying but it takes the Kanger eVod and ProTank coils and will even use the Vision Victory Coils. Unlike its big brother the mini has a nice tight fitting drip tip