Anyvape Furytank V3 Glassomizer Kit Silver *Subohms*
The Anyvape Furytank 3 is a new sub ohm tank system that includes 'Twistlock' technology to ensure a better vaping experience. Twistlock design stands for the ultimate simplicity of top filling methods, with it the drip tip and top cover become a single part. Now with just a slight twist, the chimney is lowered to cut-off juice supply to the coil wicking and ports and in addition the top slots open wide for the easiest e-liquid filling experience.
Anyvape have also released a new pair of upgraded coil heads that come standard with the next generation Furytank 3, they include a 0.3ohm (25~60W) Clapton & 0.5ohm (25~55W) Ceramic versions. Anyvape has standardized manufacturing philosophy in manufacturing and design meaning they improve on existing technology whilst keeping backward compatibility. Not only will these new coils fit the original Furytank, they'll also fit the following and vice a versa.
Atlantis V1 & V2
Aspire Triton V1 & V2
iSmoka eLeaf iJust 2
iSmoka eLeaf Melo V1, V2 & V3
Anyvape Peakomizer 2.0 Mega Sub
This means you can use ANY of the coils that fit the above tanks for the Fury V3 and Vice versa!
- Twistlock Easy Top-Filling Design
- 100% Anti Leak Design
- 100% Stainless Steel & Pyrex Glass Material
- Ultimate 0.6mm Airflow Slot
- 5.0ml Tank Capacity
- Dimensions: 23 x 58mm (50mm without tip)
- Standard 510 Connection with Floating Pin
Size: 23mm diameter, 65mm length
Capacity: 5ml (reported but as you know it's usually a little less)
Available Color: silver and black
Materials: Stainless Steel, Pyrex Glass, Oganic Japanese Cotton, Kanthal Wire
Warning: This is a sub-ohm resistance tank and has sub-ohm resistance coils! It will only work on a mechanical mod with a battery capable of 30 watt or higher or a VV/VW mod capable of 20 watt or higher. You must be sure that your mod AND batteries can handle SUB OHM coils. If you're using an electronic mod, make sure it and the battery you use (if removable) can handle the amps. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe!
You will receive:
- 1 x Furytank 0.3ohm (25~60W) Clapton Coil Head Pre-Installed
- 1 x Furytank 0.5ohm (25~55W) Ceramic Coil Head
- 1 x Furytank Replacement Pyrex Glass Tube
- 1 x Furytank Base O-Ring & Silicone O-Ring
- 1 x User Manual
This item will reportedly take many different coils, I have not tested them all.
Please keep in mind we list and report only what a manufacturer tells to us, they say this is all stainless but as we have seen with the Atlantis tank, some parts internally may be plated, we do not warranty any "metals" that are being used.
Clean all parts before using, the glass, the base and the top! Please be careful with this tank, it is made of glass and can shatter and break if dropped. Breakage of the tank is not warrantied. Filling this unit is different from the other tanks as it is filled from the top! read the manual!
When building this tank or removing parts, please be sure to clean and dry all parts. When refilling, changing the coil make sure the center tube is on properly and tight, not having it all put together properly will result in leaking. Do not overtighten the top or bottom base, finger tight is good. I grasp the top and bottom with both hands (one on top the other on the base) and twist slowly until it stops, it does not need to be tightened more than that, over tightening can cause breakage. Glass Breakage or drops are not covered under any warranty.
Do not store in pockets, try not to drop them and be careful putting them back together.
Coil heads are not warrantied, neither is the glass. as this is a new product, I suggest you purchase one to try it out.
Haven't tried it yet but I am not a fan of subohms I will update the review at a later time. I will ask David to add to this listing as he is a huge fan of subohms.
Vendors: NO VENDOR SALES