NEW Aspire Atlantis V2 Organic Cotton Coils - 1.0ohms - 5 Pack
This is for 5 coils in a pack and are rated at 1.0 ohms
WARNING: Your mod must be able to handle 1.0ohms!! It is technically not subohms, but it is still a low ohm and requires special equipment. Aspire has stated also that these do not work as well on the original Atlantis due to the increased airflow with the Atlantis V2, please DO NOT use these on the original Atlantis.
These are made from an organic cotton material for the Atlantis V2 (not the original Atlantis) with superior wicking capabilities than the prior ceramic material. This allows for more saturation of e-liquid at the coil for richer flavors and heavier vapor production. Make sure to add several drops of your e-liquid to the coil material before placing it into the tank, as this will help keep it moist. These coils will burn when dry.
Prevent your wicks! A drop or two will saturate the wick preventing burn out.
This is a notice direct from the foil pack:
When using a new atomizer, let the tank stand for 2 minutes so the cotton can be saturated with liquid before firing.
Do not let the tank become completely empty refill the tank to avoid dry burning or damage to the atomizer.
Warning: These are 1.0 low resistance coils! It will only work on the Atlantis V2 tank along with a mechanical mod with a battery capable of 30 AMP draw or higher and mod capable of 20 watt or higher. You must be sure that your mod AND batteries can handle low coils. If you're using an electronic mod, make sure it and the battery you use (if removable) can handle the amps. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe!
These coils are not made to work in ANY other item but the Atlantis V2, it will fit the Atlantis V1 but according to Aspire the heat is too great, do not use on the original Atlantis
It it the Bottom Vertical Coil, which is much like a mini cartomizer.
Vendors: NO VENDOR SALES