Loading... Please wait...

Orders placed by 2PM (EST) Monday-Friday ship same Day
We have recently moved our ship from location
Please click here to read more about our big move.


Our Newsletter

Aspire ET-S BDC - Glassomizer Rainbow

  • Image 1
  • Image 2
  • Image 3
Your Price:
$7.49 (You save $1.00)
Calculated at checkout
Minimum Purchase:
1 unit(s)
Maximum Purchase:
5 unit(s)
Current Stock:
Out of stock

Sorry, we are currenty out of stock.
Please check back with us soon.

Product Description

Aspire ET-S BDC - Glassomizer - Rainbow

Please note: these are all slightly different and the colors you will get may vary.

The ET-S BDC Pyrex "Glassomizer" (which means glass based clearomizer) comes with an aspire coils which is a bottom coil clearomizer featuring dual heating coils to provide twice the vapor while also taking advantage of a bottom feed design so that the coils are always being fed just enough juice.  NO exposed wicks, the liquid goes into the two holes on the side of the coil.  The  ET-S BDC Glassomizer has a capacity of approximately 2.0 ml of e-liquid and it comes pre-loaded with a 1.8ohm dual coil head.

The Bottom Dual Coil (BDC) design is a major upgrade when compared to similar single coil tanks not only because of the dual coils, but also because of the uniquely designed replaceable coil and airflow system.  It was designed differently to eliminate common issues such as an airy draw, gurgling, and leaking that users often experience with other clearomizers.  It also works to eliminate outside influences on flavor to provide a true and pure taste experience.

This item is ego threaded so will work only on ego devices, it also fit on almost every mod I have tried it on. The capacity is 3.0ml but I see about 2.5 on average with mine.

Comes with:
One ET-S BDC Pyrex clearomizer with one dual coil 1.8ohm installed coil (2.1ohm are available to purchase).
These Aspire coils are the new TWO hole version.

The manufacturer states this coil is good from 3v to 5v (I like it a lot at 3.8v, gets a little burned taste at higher than 4.4v for me)
This is NOT a "kit" and does not comes in a box. 

Replacement Heads for the aspire can be found here
This will take any aspire coil.

How to fill and use your Aspire ET-S BDC Glassomizer

To fill, turn the tank upside down and remove the threaded end cap. Fill the outer portion of the tank (avoid getting e-liquid into the center airflow tube, this will cause gurgling and liquid spillage) and screw the end cap back onto the tank tightly.

This is a glass (pyrex) Tank

Return Policy on this item:
If it is DOA it will be replaced, if not, it is not under any warranty, this type of clearomizer has replacable heads, if you run into an issue with a coil after using it for a while you would need to purchase a replacement. This is also not warrantied for breakage of the inner glass, be careful with it, do not drop it. Inspect your clearomizer when you receive it for cracks.

Eric's Tips: 
Some have reported that the aspire doesn't do well with "thick" liquids, if you are vaping mostly VG then you will have a harder draw with these, they have two holes in the coil. If you run into draw issues with a thicker liquid thin it down, it will become easier.
Clean this unit out with water and let it dry, you will get a better taste upon first use.
Gurgling or Leaking can occur if liquid gets into the center airflow tube. If you experience this clear this liquid by blowing through the mouthpiece into a paper towel. The excess liquid will come out of the threaded end of the device. If this happens after it is cleaned out you may need to check that all connections are screwed down tightly or replace the head and wick assembly with a new one.

The head and wick assembly can sometimes loosen itself in shipping or when the threaded end cap is unscrewed to fill and refill. Always check that it is screwed into the bottom cap tightly tightly before screwing the cap back on. Not doing so could result in a leaking or non-working device.

Always keep it wet!  This is a dual coil and is more susceptible to burn out than a standard single coil do not run the tank completely dry. Doing so could result in a burnt or damaged wick and can cause leaking. Refill the tank when the liquid level reaches approximately 1/3 full

The lifespan of replacement heads can vary quite a bit, but following the above instructions will maximize the lifespan of the coil. Coils are not warranted for any reason.

Eric's Review:

LOVE IT! The performance has been nothing short of amazing for me on all the aspire units.  It's an older style but so what? It's great and it's glass! :)


Find Similar Products by Category

Write your own product review

Product Reviews

  1. fantabulous

    Posted by Kimberly Fennessey on 19th Aug 2014

    I've been a kanger fan from the beginning, in fact I don't think I've ever used any other product, but that came to a quick halt as of yesterday, I received my new Aspire yesterday and I love it.. I have to say thank you to Eric for always providing such amazing customer service.. VAPE ON FELLOW VAPERS

  2. Great Vape

    Posted by fish on 30th Mar 2014

    I bought the Rainbow and the Stainless models and they vape great and are inexpensive for a glass clearomizer.Make sure to order extra coils because they are unique to the Aspire line.

  3. Great Atomizer

    Posted by Brett on 27th Mar 2014

    I bought this color for my wife and she loves it. We just bought about a half dozen after we tried one because they work so good. We have used Kanger tanks for the last year and after using these Aspire tanks (including the Nautilus) we sold off the Protanks (II & III), Protank Minis, extra tanks, coils, etc and we are moving to Aspire products.

Add to Wish List

Click the button below to add the Aspire ET-S BDC - Glassomizer Rainbow to your wish list.

DiscountVapers.com is an Upfront Merchant on TheFind. Click for info.