eGo USB Rapid Charger - 500mAh by Aspire
A separate dedicated Aspire charger cable for your eGo. This Aspire cable will charge any eGo sealed battery on our website (not just Aspire brand).
No more need to buy a kit, just order a spare charger cable and you are set to go anywhere.
This charger will work with any USB socket or wall charger.
Charge in your USB car socket, adapter, computer or wall socket!
Output: 4.2V - 500mAh
This charger is not recommended for 510 batteries due to the higher output and may cause damage to low mAh batteries. If used with an AC wall adapter, this requires a 5 volt, 500mA+ output. This is the recommended battery for the eGo battery and all other devices that require 500mA output.
Also practice safe charging always, by purchasing this item you agree to follow some basic safety procedures:
Safe Charging utilizes the following steps:
1. Always attach your device after you have connected the cable to the wall socket or USB port
2. Do not attach your cable to a USB port or wall charger not rated at 5 volts
3. Do not ever leave batteries charging unattended. Do not leave the room, the house or go to sleep with it charging.
4. Always check a new cable or charging device within the first few minutes.
5. Do not leave your device connected any longer than it needs to be. When it is fully charged, remove it from the chargng cable and remove the cable from the USB port or wall charger.
6. Do not charge "mods" with this cable. This is only for eGo batteries charged from the top.
I am not trying to scare you away from charging, but you need to follow safe practices. Plastic melts, devices short, things happen, be safe.