Eleaf Melo/Ijust ECR Rebuildable Atomizer Head (1 piece) - This also fit the Atlantis, Triton (full) and iJust
Reusable & Rebuildable: The pre-made coil uses a pure cotton wick and the cotton can be replaced as needed. Allows the users to use any ohm coil, with any material of their choosing (sold separately).
This item also fits: Aspire Atlantis Series, the Eleaf MELO Sub-Ohm BVC Tank The AnyVape Sega and Fury tanks
Warning: This is a sub-ohm resistance item as is. It will only work on a mechanical mod with a battery capable of 30 watt or higher or a VV/VW mod capable of 15 watt or higher. You must be sure that your mod AND batteries can handle SUB OHM coils. If you're using an electronic mod, make sure it and the battery you use (if removable) can handle the amps. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe!
Contents
1 x Eleaf ECR Rebuildable Head (With premade 1.0 ohm coil)
1 x Premade Coil Wire
1 x Organic Cotton
1 x ECR DIY Manual
Eric's Notes:
Please keep in mind this is a rebuildable item, so this purchase of for the RDA, not the parts, if they do not work for you out of the box at the rated ohms, rebuild the coil with your own supplies. That is what an RDA is for. We cannot return it for any issue with the included cotton or coil. It's replaceable.