Kanger Airflow Control Valve
This will allow you to control the amount of airflow with compatible tank systems this currently fits:
Smoktech Trophy Tank
It will not fit any other device that I am aware of.
The Kanger Airflow Control Valve does not change the type of atomizer heads you can use in your Kanger tank.
The Protank 2 with Airflow Control Valve will still use the single coil Protank 2/EVOD atomizer heads
The Protank 3 with Airflow Control Valve will still use the dual coil Protank 3/Aerotank atomizer heads
This takes the place of your Protank 2 or Protank 3 base or replaces your Aerotank air flow controller
To use the controller, simply remove the current base, swap the coil onto this unit and reattach to the tank, use the free dial to set your desired airflow.
As you start to adjust the controller you will feel the draw stiffen up or loosen depending on your needs.
Please note: this is for ONE controller, the picture with the boxes is for reference.
There is a maximum 5 per order to prevent vendors from purchasing our stock duplicate or repeated orders will be cancelled.
Return Policy: There is no warranty on this item. Because it is a replacement item it is checked for function before it leaves. Please make sure you are ok with this before ordering. We check each one for flow ring movement.
Posted by Frank Neis on 18th Jun 2014
I had been using the 510 to 510 connection to get more air flow & solve my constant issue of leaking heating coil, but it had 1 major problem. A big gap that didn't look right plus put strain on the connection & warped the threads leading to continually replacing them ever couple months.
This solved all of those issues. Be careful with the adjustment ring if you tighten it all the way closed or open you're going to have a hard time spinning it back. The surface is so smooth & the only grip is on the ring.
Posted by NYCLerka on 25th May 2014
This thing adds so much control to my Davide Tank. I have a ProVari connected to it and my Davide has been my all time favorite, this just adds the last bit of control I feel needed to perfect the tank. I highly recommend it, and at this price its a no brainer. Also, the metal feels stronger than the bottoms the Davide comes with so I think this will last longer.
Posted by Dylan on 14th May 2014
Gives your protank airflow control. and airflow control is awesome. A bit over prices for what is essentially 2 pieces of metal, but that's kangers fault not DV.
Posted by David Schroer on 28th Apr 2014
I am very glad that I bought this piece, because I just wrote a review on the Protank 3 last night after using it for about a month or so and it definitely wasn't a good one. However, all of my leaking/gurgling/popping/flooding issues I was having with this Protank 3 are gone with this base. It makes it a whole lot easier to pull good vapes out of it, and I don't get juice in the battery's 510 connector as well as I can choose how much air-flow I need. I just got it, so I am still going to have plenty of playing around with it to find that perfect setting for me.
The reason I gave it 4 stars and not 5 is because even though it works amazing, I have a couple small issues about it. First of all, when I set it to the least airflow setting, it's basically NO airflow at all, and I can't even pull anything from it. The other issue is that when it's wide open, it pulls too much air at times and doesn't seem to produce as much vapor at times and then it does produce enough at other times. It almost seems inconsistent.
Posted by Joe Dune on 8th Apr 2014
Awesome product works great on my protanks and my Trophy V2. Can't beat the price and the always fast shipping thank you!
Posted by Bobbie on 1st Apr 2014
absolutely love this product! does what it says and completely fixes my pro tanks. So glad I made DV my home for all my vaping needs. One big thank u guys for the super fast shipping.
Posted by HappyVaper on 28th Mar 2014
This is fantastic... The airflow can be dialed in without having to loosen the tank, which saves the threads. The draw is perfect because you can customize to what you want. Also, it seems to flood less than the standard base. However, if it does flood, the liquid won’t go into the battery. My wife and I use it on both the Protank II & III and the improvement is VERY noticeable.
Posted by Jay Ale on 27th Mar 2014
Mines came with a stuck control dial on top of the air holes so theres no air flow. Tried using pliers and no luck at all. Destroyed the threads on it so in the trash it goes.
Posted by Remy on 23rd Mar 2014
Airflow was a problem on the Kanger Protank II, until I got this and put it on. This thing works GREAT!
Posted by Harro on 22nd Mar 2014
Was ready to ditch my ProTank 2's due to the leak & air flow problems since I'd gotten an Aspire Nautilus & LOVE it. This little adapter works & gives the ProTank's what they should have had all along...nice vape clouds, better flavor & NO leaks. Nice to know Kanger is willing to fix to compete. Tiny space at connection doesn't bother me. They're all working well on my Provari.
Posted by Rosemary Nicosia on 19th Mar 2014
I just received this and I love it The more air more clouds .. I put a new coil on it and good to go.
Posted by Stephen P. on 16th Mar 2014
Protanks, Mini Protanks, Davides. Everything gets one. Seals off the battery, no more juicy battery contacts. Airflow ring is knurled and easy to spin (especially in comparison to the standard 510 airflow connector), and works well. Bought two of them, only bad news is that I gotta get a couple more now.
Posted by JG on 6th Mar 2014
Got these to replace the stock bottoms on my Kanger ProTanks and ProTanks II. Works like a dream. Would give it 5 stars if you could adjust the height of the center pin to make tanks set flush on all my mods.
Posted by Levi Topp on 2nd Mar 2014
I love my Davide but have begun to notice it leaking through the bottom of the 510 connection into my Launcher mod after rebuilds (5 wraps of .5 ribbon kanthal on a #16 finish nail with a maxed out kick.) That and the draw was extremely tight. This base is a horse of a different color than the original. The 510 connector is sealed, so no leaking at all. And the airflow adjusts on the fly and is easily set. I would like to see a knurled base because it is tricky to detach from my particular mod, others maybe not so much. But aesthically the smooth base is probably a big enough positive to even out with ease of use. All in all, a truly remarkable product. Currently trying to figure out if this setup isn't good enough to knock my Kayfun off the top of my all day setup.
Posted by Chris aka BIG "C" on 2nd Mar 2014
First off this makes the Protank 2 & 3 right, but because the Davide King has the dual coil adapter you turn it into a Nautilus tank. Yes, the Aspire coils fit the airflow controller.
Posted by Edward Caffray on 1st Mar 2014
Does what is says it does. but on some mods, like the Provari and the SID the center pin is a bit to long and the tank will not sit flush. This is because when you screw on a coil, it actually pushes the center pin, in the Airflow Control Valve down a bit out the bottom of the 510 connector. Would be a great revision for Kanger to make the center pin adjustable.