Kanger eVod bottom coil clearomizer - Black
The new eVod bottom coil clearomizer tank system from Kanger is a 1.7ml Tank System, with replaceable atomizer Bottoms.
The new system allows a less expensive changing of the bottom coil, the unit is different than the T3 as the T3 uses and entire base, where the eVod uses just the center portion of the bottom, which lowers the price of the bottom coil.
The Kanger eVod is eGo threaded to work with most eGo style batteries. These work very well on all the eGo series batteries, incuding the eGo Twist batteries.
The coil is at the bottom of the tank, providing a nice warm vapor, with a excellent flavor, and eliminates wicking problems.
To fill the eVod unscrew the bottom coil. Hold the tank upside down and fill with approximately 1.5-1.7ml of liquid. While it is still upside down screw the bottom back on the clearomizer. The eVod is now ready for use.
The eVod comes with :
1 x 1.7ml Tank Assembly with attached Mouthpiece.
1 x Atomizer head @ 2.5ohm Or 1.8ohms +/- .2ohm.
Please note: Kanger sometimes swiches ohms on us, usually we have 2.5ohms, if you have a preference, let us know in the order comments and if we have it, we will send it (not guaranteed).
How to fill the eVod:
The Top does NOT come off. Hold the eVod upside down, Unscrew the base, fill into the side do not get any liquid into the center hole, fill to just under the lip of the center hole. Screw the bottom back on and turn over, it will be full.
Replacing the coil on the eVod: Remove the base, then unscrew the coil from the base, replace with a new coil, screw it on the base, then screw the base on the eVod as normal.
This is a polycarbonate plastic clearomizer Please click here to see what liquids NOT to use in this polycarbonate clearomizer
Return Policy on eVod clearomizers:
If it is DOA it will be replaced, if not, it is not under any warranty, this type of clearomizer has replacable heads and replacable bases, if you run into an issue with an oring or coil after using it for a while you would need to purchase a replacement. This clearomizer is NOT covered for cracking when used with corrosive liquids. Inspect your clearomizer when you receive it for cracks, if it cracks after you've put liquid into it, it is not covered under warranty.
Those who know me know that I rarely hype something but this eVod, deserves some praise. I absolutely LOVE it. It vapes really nice.. I mean really nice. It's smooth and gives out good vapor and more importantly flavor. You have to vape it for a bit to get it really going but once it does, it's exceptional in a sea of so-so clearomizers. I have now switched to this as of today 04/01/2013, so now my rotation is all Kanger Products. My suggestion is to fill it, let it sit for a few minutes and soak in. Then get to vapin! The only thing to watch out for is how you screw the base on, be careful with it, screwing on the base improperly, too tight or too loose can damage orings and cause leaking.
Kanger also included some info on their recommended voltages and ohms and it's prety much spot on:
1.8ohm Heads: 3.1-3.4V
2.5ohm Heads: 3.9-4.2V (although I do like mine at 3.7 wich is what the eVod battery puts out)
(2.5ohm is what comes standard in this purchase)
Please keep in mnd this is a polycarbonate clearomizers so you cannot use acidic liquids.