Loading... Please wait...

August 8th 2016 FDA Rules change for all Vaping Retailers is now in effect.
We are required to age check BY LAW, this will happen after checkout and you will not notice any changes. We are now using Veratad. If you do not automatically age verify we will contact you via email before shipping your order, this may delay shipping. For more information, click here.
Age Verified Orders placed before 2PM (EST) Monday - Friday and Saturday before 10AM ship same day.

Our Newsletter

Kanger eVod Bottom Coil Clearomizer - Stainless

  • Image 1
  • Image 2
  • Image 3
Calculated at checkout
Current Stock:

Product Description

Kanger eVod bottom coil clearomizer - Stainless

Please note As of 07/09/2013 this now comes with the longer stem coil like the ProTank

The new eVod 
bottom coil clearomizer tank system from Kanger is a 1.7ml Tank System, with replaceable atomizer Bottoms.
The new system allows a less expensive changing of the bottom coil, the unit is different than the T3 as the T3 uses and entire base, where the eVod uses just the center portion of the bottom, which lowers the price of the bottom coil.

The Kanger eVod  is eGo threaded to work with most eGo style batteries. These work very well on all the eGo series batteries, incuding the eGo Twist batteries.
The coil is at the bottom of the tank, providing a nice warm vapor, with a excellent flavor, and eliminates wicking problems.

To fill the eVod unscrew the bottom coil.  Hold the tank upside down and fill with approximately 1.5-1.7ml of liquid.  While it is still upside down screw the bottom back on the clearomizer.  The eVod is now ready for use.

The eVod comes with :
1 x 1.7ml Tank Assembly with attached Mouthpiece.
1 x Atomizer head @ 2.5ohm Or 1.8ohms  +/- .2ohm.
Please note: Kanger sometimes swiches ohms on us, 
usually we have 2.5ohms, if you have a preference, let us know in the order comments and if we have it, we will send it (not guaranteed).
65mm Height 

Replacement heads are here

How to fill the eVod:

The Top does NOT come off. Hold the eVod upside down, Unscrew the base, fill into the side do not get any liquid into the center hole, fill to just under the lip of the center hole. Screw the bottom back on and turn over, it will be full.
Replacing the coil on the eVod:  Remove the base, then unscrew the coil from the base, replace with a new coil, screw it on the base, then screw the base on the eVod as normal. 

Please click here to see what liquids NOT to use in this polycarbonate clearomizer 

Return Policy on eVod clearomizers:
If it is DOA it will be replaced, if not, it is not under any warranty, this type of clearomizer has replacable heads and replacable bases, if you run into an issue with an oring or coil after using it for a while you would need to purchase a replacement. This clearomizer is NOT covered for cracking when used with corrosive liquids. Inspect your clearomizer when you receive it for cracks, if it cracks after you've put liquid into it, it is not covered under warranty. 


(2.5ohm is what comes standard in this purchase)
Please keep in mnd this is a polycarbonate clearomizers so you cannot use acidic liquids.  

Find Similar Products by Tag

Find Similar Products by Category

Add to Wish List

Click the button below to add the Kanger eVod Bottom Coil Clearomizer - Stainless to your wish list.

You Recently Viewed...