Loading... Please wait...

August 8th 2016 FDA Rules change for all Vaping Retailers is now in effect.
We are required to age check BY LAW, this will happen after checkout and you will not notice any changes. We are now using Veratad. If you do not automatically age verify we will contact you via email before shipping your order, this may delay shipping. For more information, click here.

    Please note:
    In order to limit exposure to Covid-19 for our staff and family, we are temporarily adjusting our shipping schedule. The updated schedule can be found on our Shipping/Returns link above.
We apologize for any inconvenience.

Our Newsletter

Kanger T3s Rebuildable Clearomizer - Clear

  • Image 1
  • Image 2
Calculated at checkout
Current Stock:
Out of stock

Sorry, we are currenty out of stock.
Please check back with us soon.

Product Description

Kanger NEW T3s Rebuildable Clearomizer 

The new T3s eGo bottom coil clearomizer tank system from Kanger is a 2.4ml Tank System, with replaceable atomizer coil.
The T3s is a new design that has the same replaceble style head as the eVod. 
If you previously had the T3 the difference is that the coil in the base is now removable making replacements cheaper.

The Kanger eGo T3s is designed to work with the eGo series of batteries. The T3 has a large 2.4ml tank capacity, and replaceable atomizer bottoms.
The Kanger T3s is eGo threaded to work with most eGo style batteries. These work very well on all the eGo series batteries, incuding the eGo Twist batteries.
The coil is at the bottom of the tank, providing a nice warm vapor, with a excellent flavor, and eliminates wicking problems.

The T3s comes with: 
1 x 2.4ml Tank Assembly with attached Mouthpiece.
1 x Atomizer head
1 x T3s Base
Fully assembled ready to vape when eLiquid is added.
Replacement Coils are located here
Please click here to see what liquids NOT to use in this clearomizer 

How to fill the T3s:

The Top does NOT come off. Hold the T3 upside down, Unscrew the base, fill into the side do not get any liquid into the center hole, fill to just under the lip of the center hole. Screw the bottom back on and turn over, it will be full.

How to replace the T3s coil:
1. Remove the base, unscrew the coil
2. Screw the new coil into the base 
3. Screw the base on the T3s 

The Original T3 and MT3 bottom coil replacements with the permanent attached coil are compatible with the new T3s/MT3s Bases and coils you can use a new style or original style base/coil on either.
The MT3s and the T3s use the same replaceable Bottom coil.  
You can use the T3s/MT3s coil on eVods and ProTank but you cannot use the eVod or ProTank coils on the MT3s or T3s


Find Similar Products by Category

Add to Wish List

Click the button below to add the Kanger T3s Rebuildable Clearomizer - Clear to your wish list.

You Recently Viewed...