Loading... Please wait...

August 8th 2016 FDA Rules change for all Vaping Retailers is now in effect.
We are required to age check BY LAW, this will happen after checkout and you will not notice any changes. We are now using Veratad. If you do not automatically age verify we will contact you via email before shipping your order, this may delay shipping. For more information, click here.

    Please note:
    We will not be shipping Saturday, February 24th. Age verified orders placed after 2PM on Friday the 23rd will be shipped on Monday, February 26th. We apologize for any inconvenience.

Our Newsletter


Smoktech PBC V1 - Pink

  • Image 1
Price:
$8.99
Brand:
Shipping:
Calculated at checkout
Minimum Purchase:
1 unit(s)
Maximum Purchase:
25 unit(s)
Current Stock:
Out of stock

Sorry, we are currenty out of stock.
Please check back with us soon.



Product Description

Smoktech PBC V1 -Pink

The SmokTech Pyrex Bottom Coil Tank Clearomizer V1 is a bottom coil clearomizer (BCC) tank featuring a pyrex glass tank so you can use any liquids without fear of cracking.

The version 1 is the largest of the two PBC tanks available and it holds approximately 6.0ml of e-liquid.  This is the Largest Pyrex tank we carry!

It offers the same great features and performance as other Smoktech bottom coil clearomizers like the ARO's and has a strong pyrex glass tank and solid stainless steel construction. The PBC Tank is 510 threaded and will work on any eGo style battery or Mods that have 510 threads. The bottom feed design makes the PBC Tank great for use with all liquids.

Replacement heads are here 

This will only use Smoktech Bottom Coil Replacement coils. The same coils are used with ARO/Tumbler/RBC/GDC/PBC
This unit comes with a 2.0ohm coil. (not guaranteed as smoktech sometimes swaps them, so please check)
This is not a kit; it is the unit with coil only.

How to Use your SmokTech Pyrex Bottom Coil Tank:

To fill, turn the tank upside down and remove the threaded end cap. Fill the outer portion of the tank (avoid getting e-liquid into the center airflow tube). Screw the head and wick assembly onto the threaded end cap tightly then screw the end cap onto the tank tightly. You can now turn it rightside up and check for leaks before using.
Gurgling or Leaking can occur if liquid gets into the center airflow tube. To clear this liquid and improve performance remove the tank from the battery and blow through the mouthpiece into a paper towel. The excess liquid will come out of the threaded end of the device. If this happens often you may need to check that all connections are screwed down tightly or replace the head and wick assembly with a new one.
The head and wick assembly will sometimes loosen itself when the threaded end cap is unscrewed. Always check that it is screwed on tightly before replacing the threaded end cap. Not doing so could result in a leaking or non-working device.
You should never run the tank completely dry. Doing so could result in a burnt or damaged wick and can cause leaking. Refill the tank when the liquid level reaches approximately 1/3 full
The lifespan of replacement heads can vary quite a bit, but following the above instructions will maximize the lifespan of the coil.

Eric's Review:
This is just like the ARO but in tank form: a good clean vape, a solid entry into transparent tanks for smoktech.  

Find Similar Products by Category

Add to Wish List

Click the button below to add the Smoktech PBC V1 - Pink to your wish list.

You Recently Viewed...