Loading... Please wait...

Orders placed before 2PM EST Monday-Friday ship same day, Saturday before 10AM

Our Newsletter

UFS Clone by ehPro - Rebuildable Atomizer

  • Image 1
  • All Parts laid out
  • Image 3
Your Price:
$24.99 (You save $43.00)
Calculated at checkout
Current Stock:

Product Description

UFS Clone - Rebuildable Atomizer

Important Notice: It has come to my attention that this is the Tobecco version, ehpro sent these to me under the pretenses that it was "theirs" and yet the box is clearly tobeccos. My inquiries to ehpro have been met with "sometimes we buy from tobecco when we are out" A little dubious to say the least.

Please note: I picked this up because of requests, I do not know anything about this product, how to use it, put it together or how it works. This was requested so I purchased it from ehPro.

Please take a close look at the pictures to see what you are getting there are several pictures out there on the internet of ehpro's UFS that do not look exactly like this one, this is the newest "version" as it was purchased the last week of September and delivered on October 4th.

The manufacturers description: (not mine)

1. rebuildable atomizer
2. can use for  510 atomizer , 510 cartomizer , nick .
3. nick is rebuildable cartomizer , can change wire and wick,  make different resistance.
4. clear window
5. capacity is 6ml
6. can control vape air
7. 510 thread connecter ,can be suitable for ego system battery ,vamo,blade, telescope etc

Comes with:
1 Padded Box (nothing special)
1 UFS Clone Fully assembled
No instructions come with this unit, no spare parts, but it's coil is already built, it is assumed you will know how to make it work.

Warranty on this item: NONE, we do not warranty rebuildables or the parts that come with them. This is an advanced device and you should not buy it if you are not familiar with them.  The plastic tank to me seems like the threads would strip fairly easily, this is NOT warrantied in any way. I will do my best to get replacable parts for this item but there is no guaranty that I will. Again, this is important, I am not warrantying this item. You buy it, it's yours. These are untouched by me and I do not have the spare parts yet.

This does not come with any other parts not shown in the pictures.

Please note: This is a new device, reported to be a clone of the UFS and a 1 for 1 copy, I have no information on it other than that. But it is not intended here to be used as parts for any other device out there. Please always get original parts for your items. If it does not say "ehpro" in the title and Brand "ehpro", it may not fit. I do not know if other "UFS" or other brands parts will fit this item. I do not have an original UFS to test with.

Please wash and inspect your purchase throughly, these are machined items and can contain shavings or particles you need to remove.

I do not know anything about this unit except for what is in this post, I don't generally use rebuildables but I offer them due to demand. This unit is made by ehpro. 

Eric's Review:
Well it's beast, a pretty beast, but heavy and huge, I can't figure it out, looks like a dripper enclosed in a lot of useless parts.  It can be made to be different sizes with or without the tank etc.. I asume if you are buying this you know how it works, so you are on your own here.


Direct From Rolygate at ECF... a Warning:


Please note very carefully that rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it may damage the device it is used on.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
7. These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.
8. RAs or RTAs must only be used on equipment that cannot be seriously damaged or harm the user. In practice this could mean an electrical device with a hot spring (fuse) or an electronic device that will not activate if there is a short-circuit (a dead short). Unfused devices or unprotected electronic devices will suffer damage when used with a faulty RA or RTA.


Warranty Information


Find Similar Products by Category

Write your own product review

Product Reviews

  1. Why is this product still around??

    Posted by Ryan on 1st Mar 2014

    What with the popularity of kayfuns and such i just cannot believe this product is still in stock here months after i bought the first one. Its still one of my best, and i've got TONS more since. The rebuildable that it comes with IS actually VERY awesome. I own a lot and this one is right up there with the "name" brands and top clones, in terms of functionality(doesn't have to look nice as its internal). I'm also pretty sure this atty that comes with it will work flawlessly on a Reo, so its purchase for the atty alone may make this be an idea for bottom feeders. (i don't own a Reo so i cannot confirm, but what i understand about them and the workings of this atty would make it perfect fit i would think). People BUY THIS!! It tops an ithaka easy. It may be an overdesigned carto/tank, but a carto-tank you cannot rebuild and customize to your resistance. A carto-tank does not hold 10mL. Also, you will not get muted flavour with this as you would with a cartotank, as long as your coils are built right. Just buy this!! Now!!! Or you'll never know what you would have missed out on!!

  2. UFS clone by "EhPro" aka Tobecco

    Posted by Ryan on 14th Nov 2013

    Well, since i've never tried ehPro's version of this thing i got nothing to compare it to... All i know i this thing works great... it doesn't give the BIGGEST clouds outta all my atties, but its definately up there in terms of flavour and fanciness! Its been sitting for hours full and no leaking issues yet. Driptip is a BIT loose, but like someone else mentioned, put another o-ring on there on the slot part and it seals and holds it perfect. My ONLY complaint THUS FAR is when i pulled out the +ve post at the bottom 510 section, above the screw on part, to clean the sucker, when i went to put it back in after, it looked like an o-ring was jammed in there which was sliced in half after i pushed the post back in... seems to work fine with no issues still, so im not even sure what that o-ring was doing in the first place?? (also, im not even sure how they got that thing in there, since it was damn near impossible to get a flashlight to see down into the hole!!)I really like it. I would def buy another if i lost this one or anything happened to it.

  3. Really Love this thing....

    Posted by Victor F on 7th Nov 2013

    Once you learn how to manage the fluid control and air control, there is no beating this tank. At the moment. I have not tried it with an atomizer, because the rebuildable that come with it is good enough..The first time I used it, I got totally nic'd. Thanks Eric, this was a good one.....

  4. Complex, Heavy, and yet amazing!

    Posted by CloneMaster on 3rd Nov 2013

    This is a 1:1 clone of the GG UFS v3. The only thing different is the diameter of the tank o-rings prevent the tank from being screwed together all the way.

    This has a very steep learning curve. I spent the first day flooding cartomizer until I figured out that if you don't screw the cartomizer in tight enough then when you unscrew the tank section to lock off the fluid the o-ring near the mouth piece will unscrew the carto.

    I found that it is best when putting everything together to use liberal amounts of Vaseline on the o-rings. On the topic of the O-ring near the drip tip, I found that putting an o-ring off a drip tip around the top of the carto before screwing on the last piece helps seal the top

    Overall it works great, but in GG fashion it just an over-designed carto-tank. I ended up selling it off and returned to using a UD-AGR+

  5. Solid hunk of machined metal

    Posted by Supervape on 27th Oct 2013

    Slight learning curve but man this thing chugs like a choo choo train. And the best place to buy it right here at Discount Vapers. Thanks Eric for bringing us cool stuff!

  6. simply amazing

    Posted by 300fury on 22nd Oct 2013

    prior to this i have really only used dripping atomizers and carto tanks. I have been searching for the taste of an atomizer and capacity of a carto tank. this thing is very easy to set up, but i would reccomend looking on youtube for instruction. (its not the exact product, but the tutorial makes things clear) be sure to use vasoline on all the threads. be prepared for a huge device. does not leak but carrying in the pocket is like having a brick in there. have only used with the atomizer that comes with, but cant wait to try cartos and 510 attys. if you have built coils for drippers you will have no problem here....GREAT product and awesome service from discount vapers!!

  7. Gurgle, needs new O-Rings from hardware store or Eric

    Posted by Alexander Jones on 20th Oct 2013

    First I would like to thank Eric G. for his awesome #1 customer service, you CANNOT go wrong here!

    As for the UFS V3 clone, it is very well built except one thing. O-rings that hold together the mouthpiece down to the repairable atty. I am going to and suggest if you purchase this to get bigger tighter o-ring (I think Eric sells them as well)I get a gurgle and juice in the mouth as the seal are wobbly (ONLY the mouthpiece down to the nick, the rest of the tanks o-rings are solid) After that issue is fixed this thing was hitting like a beast just like Eric said, THIS THING IS A BEAST! Until you get tighter fitting O-rings refrain from laying on it side as not to let juice go places you do not want it to. I gave it 4 stars because of the o-rings but posted a 5 star because of price and,quality and awesome CS. Thank Eric

    Also if anyone has any answers to my issue please feel free to write my email kwaione22 at gmail

  8. What a build...

    Posted by john van welij on 19th Oct 2013

    Just opened and took apart, of course, the UFS clone...without sounding overly enthusiastic...these are build AWESOME...super threading, everything. Can't believe not more ppl are jumping on this one...i own a bunch of rba's but this one fits right in the top with them.

  9. What a build...

    Posted by john van welij on 19th Oct 2013

    Just opened and took apart, of course, the UFS clone...without sounding overly enthusiastic...these are build AWESOME...super threading, everything. Can't believe not more ppl are jumping on this one...i own a bunch of rba's but this one fits right in the top with them.

Add to Wish List

Click the button below to add the UFS Clone by ehPro - Rebuildable Atomizer to your wish list.

DiscountVapers.com is an Upfront Merchant on TheFind. Click for info.