Sorry, we are currenty out of stock.
Please check back with us soon.
The AGA Tiamat PLUS -
Rebuildable Atomizer In ALL Stainless Steel with Glass Tank
These are on order and due in between 04/03/ and 04/06
Please note: This is the same unit as AGA-T2
I choose to sell this with a Plasctic tank AND a glass tank, to give you an extra piece.
The AGA-t+ is the one with the Plastic Tank, the AGA-T2 is the one with the Glass tank, you get BOTH
New! an affordable COMPLETELY STAINLESS rebuildable atomizer with a CLEAR tank system holding up to 3.2+ml
Every part is stainless unlike the Tiamat which has non stainless screws and center posts.
Comes assembled with the standard plastic tank AND I am sending a spare seperate Glass Tank with every order
Do NOT buy the glass tank seperately unless you need a spare.
New in the Tiamat + as of 02/12/2012
1. All Stainless parts
2. SMOOTH EDGED Glass Tank and thick plastic tank comes with purchase
3. Positionable 1.2mm air hole with rotating (but not lose) top cap
4. New smooth stainless bottom design
5. Comes with mesh and coil
6. New Gasket Design, no longer Orings. Gasket seals the tank with a wrapped lip
NOTE: Wash out the glass tube and the unit itself, I repeat WASH OUT the glass tube and the unit itself before first use.
These are machined devices and you'd want to make 100% sure there are no shavings or any bits left over.
Most rebuildable atomizers are not for beginners as it takes some patience and skill to get working properly. This one comes with Stainless Steel Mesh but if you choose to stick with the standard wick and coil setup you can simply purchase premade wick and coil.
Made with all Stainless steel parts and a thick plastic and glass tank. This comes with ss mesh and coil but can be used with wick and coil.
Can be disassembled and put back together in minutes, very easy to clean, use and rebuild with some experience or practice.
20.4mm Overall Diameter (Tank)
22.5mm Overall Diameter (Outer shell)
60mm Overall Length assembled (without drip tip)
1 Tiamat Unit partially assembled with plastic tank (assembled), no drip tip is included
1 Glass Tank
1 Parts Kit:
(3) Extra Orings (1) Extra grommet seal (1) Extra Screw (1) Extra Washer (1) piece of SS Mesh (400) 45mmx45mm (1) nichrome wire 100mm
GLASS TANK IS NOT OPTIONAL at this time!
Check out how the new drips tips (made by the ame company) look on the Tiamat! Sharp!
You can find these in the Drip tip section under "Stainless Drip tips"
Please note: due to the rebuildable nature of this item, there are no refunds and no exchanges. Vape quality with the included mesh is not warrantied as it is fully customizable. You can change it to suit your needs. I have had several people order a rebuildable only to ask for refunds because they did not know how to get it working, I cannot resell used rebuilables, please... keep this in mind.
Direct From Rolygate at ECF... a Warning:
Please note very carefully that rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it may damage the device it is used on.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
7. These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.
8. RAs or RTAs must only be used on equipment that cannot be seriously damaged or harm the user. In practice this could mean an electrical device with a hot spring (fuse) or an electronic device that will not activate if there is a short-circuit (a dead short). Unfused devices or unprotected electronic devices will suffer damage when used with a faulty RA or RTA.
copied from ECF forums.
Showing reviews 1-20 of 46 | Next
Posted by OG Dave on 23rd May 2013
I received two AGAT 2 about 3 weeks ago. I have had the most enlightening experience vaping with these units. I have been vaping with high voltage for the past 4 years. I use manual mods with Kicks and vape all the way up to 6.4 volts. I now know going low is the best way to go. The rebuildable units are the way to go. The enhanced taste and amounts of vapor are off the hook. If you are serious about vaping consider this, I vape for the flavor and the enjoyment of the moment. This gives me both at the same time. Vape long and live long.
Posted by R.S. on 17th May 2013
This is what a rebuildable atomizer should be, great price, great vaping, and great quality craftsmanship. You can not go wrong with this atty, it really doesn't need any modding or changes, I can almost fill a room with the vapor I get from this bad boy. I want another one, please get more in with this deal.
Posted by Unknown on 15th May 2013
Not the RBA's fault, I'm sure. It works, produces good vapor (after I drilled out the air hole). I've tried 300-500 mesh screens 27-32 AWG wire, steel cable instead of mesh. I just can't seem to find something I am 100% on. I have an A7 and out of the box worked and worked well in every catagory I care about. Plus I go through like 6 ml a day with the tank which is too much juice for me...DV is the bomb and the only place I will buy items from.
Posted by Gabe on 27th Apr 2013
Ordered this when I decided to start playing around with the China RBA's. After looking at the same model at different vendors, this one was the best value I could find since you get BOTH tanks and the spare parts, which always comes in handy.
Nice build quality, and the best part is that you can pretty well configure it how you want. So far playing with it, I've set it up with dual and triple SS wicks and ribbon vertical coils, and ran a nice silica horizontal coil through it as well.
The tank has a nice large capacity, and the use of nuts instead of screws for holding the wire to the center post is nice as well. The whole thing is pretty easy to disassemble to clean too.
Overall it's a good starter RBA Tank, and I carry mine around most of the day with me when I'm out and about now, when I don't want out risk losing some of my nicer RBA's
Posted by Robert Lee on 18th Apr 2013
+ 1 on all the other positive reviews . Doesn't make sense to rehash whats already been said.
DV is my new source for my vape gear . Thanks Eric
Posted by WEISNER on ECF on 15th Apr 2013
I am new to RBA so I can't be too critical. All the parts where delivered and in good condition when I received them.
Posted by William on 13th Apr 2013
I have really enjoyed my device. Got it up and running within ten minutes of getting the mail. I got the Ming stainless drip.
Posted by Thenn on 31st Mar 2013
I've owned a $70+ Rebuildable atomizer, broke within minutes of use. This thing is a beast for the the price. Figure on 5 CE3 costing around $10 lasting roughly 15-20 days. I've used this AGA-T2 w/Pyrex tank for about 2 weeks exclusively. No changing coils, no washing, nothing except refilling the tank. If it lasts me 3 months, it pays for itself. Well built, but needs a little trial & error to get vaping like a freight train.
Posted by Arnold on 30th Mar 2013
I really love my agat+ , it's my first rba and wow ! I'm glad i ordered an extra parts kit as my first attempt at wicking my tank was a failure but second attempt with the mesh proved successful!!! I immediately removed the poly tank with included glass tank , freat fit !! no rough edges. I made sure to watch a lot of tuts on how diff ppl oxidize and rebuild coils and maybe I got lucky 2nd time around, I'm using 34g kanthal twisted 2x as i didn't have any other gauge wire to reach my desired ohms. My aga t + is now on my gold k100 empire clone I purchased with the same order . Im at .8 ohms. Wow !! I love the vapor production, I am very pleased with the AGA t+.
Posted by CC on 29th Mar 2013
This is a great little RBA for using at home, but if you plan to take it with you (out of the house) as your usual tank, you will be very disappointed. Make sure you read up on RBAs. Most will leak (Genesis style). This model has only two o-rings to keep the top cop attached. Mine falls off easily. And the air hole will also leak when its left on its side. But, if its JUST for at home then definitely buy one. It vapes like crazy and is easy to set-up with the Peter K Method.
Posted by kingdm on 28th Mar 2013
I had to drill it out to 1/8" to accomodate my homemade fishwicks, once that was taken care of it worked brilliantly with the exception of being a wee bit airy, if only it were adjustable, small piece of scotch tape over a portion of the hole and it was spot on. It is a very stout tank, solid stainless.
Posted by btally on 27th Mar 2013
Get into a genesis rebuildable atomizer without paying $150!!! It works, but only as good as how you build it. Don't forget wick and resistance wire when you order because the stuff that comes with it isn't that great, but it was a free addition to a great atomizer.
Posted by Steve on 23rd Mar 2013
Nice product, first time I ever tried to rebuild anything, and I made many mistakes. I finally got it working, doing 1.9 ohms with SS mesh wick, working pretty good. I think as my experience grows, my results will get better. Glass tank has smooth edges, looks really nice, had to press somewhat hard to get one end in, but no leaks.
First time order, two thumbs up. Gave the little ball to my kitten, that way we both had something new to play with. I believe I am going to like this world of rebuildables, and I have found another top notch vendor.
Posted by Unknown on 23rd Mar 2013
I have really enjoyed my device. Got it up and running within ten minutes of getting the mail. Absolutley splended. I was supposed to get a stainless horn style drip tip but got a yellow and orange dinasour insted. Still wondering how to make a cute drip tip out of it.
Posted by ariel -san diego, ca on 23rd Mar 2013
this is my first genesis atty and i gotta say that this thing rocks! the glass tank that came with mine was flawless, all edges were heat treated and rounded. everything in the spare parts bag was accounted for. i built it with the supplied mesh and some 30awg i already had and was impressed with the performance. i did bore my airhole to 3/32 because that's how i like to vape, short airy drags. swapped the coil to 28awg kanthanl and now this thing is a beast. i am enjoy huge clouds of vapor like dripping with the convenience of a tank. i would definately recommend this to my friends and purchase another one for myself.
Posted by VaporDave on 20th Mar 2013
I ordered from DV because the prices are unbeatable. I wasnt expecting superb product as well. This RBA is amazing.It was my first and it was easy. The difference is unreal in flavor and vapor production.
Posted by heath ellis on 17th Mar 2013
I have two ordered one loved it ordered another. I enlarged wick hole and use ceramic wick. vapes up a storm. For 30 bucks it's a steal.
Posted by Grinch99 on 3rd Mar 2013
Machined very well.
New gaskets on tank work good.
I can't find anything negative to say about this unit.
If you make a good wick and coil this unit will rock your vaping world.
I'll definitely get another.
Posted by Unknown on 2nd Mar 2013
This is my second rebuildable atomizer. Not wanting to spend $100 plus on a top of the line one, I purchased this. I planned on performing some modifications including adding a second wick and coil. I haven't found the need for this as this atomizer produces tons of good tasting vapor. I have had no problems with it at all, it is easy to rebuild and works great on all my batteries. The glass tank is a great bonus. Simply put Discount Vapors, you rock!
Posted by Unknown on 25th Feb 2013
This is my first rebuildable, after watching some videos about the SS wick, and wire, had it up and running in about 10 minutes. Quality build, seems solid, and extra parts with the kit. Gives a great vape, eaty to take a part and clean, nicely machined parts. I would highly recommend this product.
Showing reviews 1-20 of 46 | Next