Loading... Please wait...

August 8th 2016 FDA Rules change for all Vaping Retailers is now in effect.
We are required to age check BY LAW, this will happen after checkout and you will not notice any changes. We are now using Veratad. If you do not automatically age verify we will contact you via email before shipping your order, this may delay shipping. For more information, click here.
Age Verified Orders placed before 2PM (EST) Monday - Friday and Saturday before 10AM ship same day.

Our Newsletter

Fogger V5 - Stainless

  • Image 1
  • Image 2
  • Image 3
Your Price:
$14.99 (You save $13.00)
Calculated at checkout
Current Stock:

Product Description

The Fogger v5!

It features 4 juice channels as well as dual coil capability. It also has adjustable airflow ring located on the bottom for different levels of airflow.
The unit itself is completely made of stainless steel and pyrex glass.
The contact pin is made out of copper for minimum voltage drop. The pin is also adjustable so it can sit flush with many of your devices.  


Yiloong spent the last few of months refining, improving and perfecting the fogger, combines all the pros of fogger versions from fogger v2-fogger v4.1 ,as well as other famous tank atomizers. Now here comes the FOGGER 5.0. Aesthetically, it shares some simlarities with the fogger 4.1. however they are far from looking identical.


IMPROVEMENTS (from manufacturer page):
It offers a great convenient at wicking coils, no more headache while wicking or rebuilding, no more screws, much more simple than center hole design. Just slightly push the buttons then wick through the center hole, release then done, simple. Forget about drills and screwdrivers.


Most tank atomizers are feed from the bottom, as well as our fogger 4.1, this kind of design would not be that convenient to refill when the atomizers sit on the mod or when you vape.

For the fogger 5.0, just simply take off the oring on the top of the feed slot, then feed with bottle or syringe. There's a small hole in the opposite direction of the feeding hole, which will not get flooded when feeding.


This time, with a wide open air hole, tight air flow control ring and a delrin behind the air flow control ring, enable to click into place for a better airflow setting, also allow a highly-customizable vaping experience.


The post insulator is DELRIN material,withstand high temperature over than 1500℃ (2732℉)and current,support 0.1~0.3ohm and continuous vaping.So it wont get melted while for general vaping, sub ohm vaping or cloud chasing.

Fogger 5.0 has it all: great performance ,great vaping experience,easy setup,classy good looks. much more could be said about it. while this is the atomizers you have to try for yourself to understand just how amazing it is.Now time to move up to use.

This item is NOT pre-built, you will need to build your coil.

Please wash and inspect your purchase throughly, these are machined items and can contain shavings or particles you need to remove.
I do not know anything about this unit except for what is in this post, I don't generally use rebuildables but I offer them due to demand. This unit is made by Yiloong. 

 Please note: due to the rebuildable nature of this item, there are no refunds and no exchanges unless there is a defective part out of the box. Vape quality is not warrantied as it is fully customizable.

Eric's Notes & Warnings on rebuildable Atomizers

1. DiscountVapers is not responsible for any damages or injuries sustained from the misuse or abuse of this item. DiscountVapers does not manufacture this product, it is a China item.
2. This item is sold with the intent that the user will use standard ohms (
single coil setups between 1.8-4.0ohms) and be familiar with coil building and battery safety, this device is NOT for beginners.
3. Because this is a DIY customizable device, we cannot offer you instruction on how to use it or warranty it's usefulness or safety.
4. It is becoming popular to do "subohms" on rebuildable atomizing devices.  We do not cover subohm vaping in any way and do not condone it.  You must be familiar with all aspects of sub or even low ohms (anything below 1.8ohms) before using this rebuildable atomizer in that manner or you WILL cause damage to the battery, mod, the attached device and/or yourself.  DiscountVapers provides NO information on subohm vaping and we consider it dangerous, please do NOT use this rebuildable atomizer for subohms.
5. Please read the warning below from a knowledgeable source at ECF

While you can do whatever you like with your purchases, we ask that you practice safety with your devices and batteries and if you have questions you contact us first or consult a reputable source before using your devices.  If this is your first rebuildable, please do not hesitate to ask any questions before using, while we cannot teach you how to build coils, we will answer any safety questions you might have. This device is not an out of the box vaping device and must be customized by the user. It is assumed you have the required knowledge to use it.

Direct From Rolygate at ECF... a Warning:

Please note very carefully that rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it may damage the device it is used on.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
7. These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.
8. RAs or RTAs must only be used on equipment that cannot be seriously damaged or harm the user. In practice this could mean an electrical device with a hot spring (fuse) or an electronic device that will not activate if there is a short-circuit (a dead short). Unfused devices or unprotected electronic devices will suffer damage when used with a faulty RA or RTA.

copied from ECF forums.


Warranty Information


Find Similar Products by Category

Add to Wish List

Click the button below to add the Fogger V5 - Stainless to your wish list.

You Recently Viewed...