Loading... Please wait...
Sorry, we are currenty out of stock.
Please check back with us soon.
Pegasus A7 Rebuildable Atomizer - Stainless Steel
Similar to the Phoenix but made with stainless steel and other enhancements, this rebuildable is an excellent addition to your collection. Great for vaping and dripping. If you want to try your hand at wick and wire, this is a great item for your collection, made of stainless there are no worries about metals or any contaminant issues with any liquids.
The Pegasus A7 Comes with a standard 510 native connection and features a removable coil and wick held by 2 screws making it easy to dismantle and rebuild, fully assembled with a 2.4ohm coil and plastic 510/901 drip tip is also included.
14.05mm Overall Diameter
37.25mm Overall Length
Unique Features:
Adjustable connector so if you have a battery that is stubborn, adjust the connector
Air flow comes from the 510 connector just like a standard carto, no leaking through a top cap air hole!
Made with Stainless Steel.
Comes with:
(1) Pegasus, Fully assembled and ready to vape with included 510 Drip tip
Eric's Review:
Wow this stuff just keeps getting better and better, with ZERO Prep, I took this out, filled it with a bit of liquid (10 or so drops) and vaped like a crazy person. I am really impressed. I have no issues with airflow and the adjustable bottom worked on my compressed eGo battery that didn't seem to fire anything else. This one is my favorite out of box experience by far for rebuildables.
**************************************************
Direct From Rolygate at ECF... a Warning:
**************************************************
Please note very carefully that rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it may damage the device it is used on.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
7. These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.
8. RAs or RTAs must only be used on equipment that cannot be seriously damaged or harm the user. In practice this could mean an electrical device with a hot spring (fuse) or an electronic device that will not activate if there is a short-circuit (a dead short). Unfused devices or unprotected electronic devices will suffer damage when used with a faulty RA or RTA.
Posted by Tom on 24th Apr 2013
I have a VV Bogger Box Bottom Feeding System so my choice of RBA is severely limited.
I made the mistake of filling and vaping immediately. It tasted putrid.
Than I called a friend who told me to run it through hot water. [Not Boiling] so I thoroughly rinsed the wicking and coil with Hot Water. Now it Tastes Great.
Great out of the Box. The Ohms [On Mine] though are at 3.2Ohm and 2 days later are at 3.8Ohm, since I have a VV doesn't make a difference. But if you are on a mechanical you'll need to make your own wick.[If yours tests like mine]
Works great with my bottom feeder, just the right amount of draw. Next step is to start making my own coils. Sigh...
Hey Eric how about selling some premade Wick and Coils, I'm the lazy type.
Posted by Jarod on 31st Jan 2013
I got tired of fiddling with the eyeglass sized screws on the Phoenix so I ordered this and I am very happy I did so. The screws and post holes are bigger and therefore easier to set up than the Phoenix. It also has the adjustable 510 connection which is great if you use it on multiple mods/batts. Only downside (if any) would be the pre-installed wick tasted like feet... and @$$. Once I swapped it out for ss mesh and some 28 Kanthal... Awesome vape! Very happy :)
Posted by zsazsa45 on 26th Jan 2013
Right out of the box great. Even has a screwdriver with it. Have not rebuilt it yet but looks just like the Phoenix. I like the true 510 connection. Great quality device. Draws just like a stardust, just right for me. Looks perfect with my Matrix telescope or my mini eGo. True taste and good vapor production. Can vape for a good half hour and then some on one fill, so you can vape and drive. I have no cons to list. As always great service from Eric ;)))
Posted by frances on 18th Jan 2013
I drip about 50% of the time and have used LR 306s for a couple of years ... but not anymore ... the A7 with ss mesh hands-down vapes better with more flavor,vapor and throat-hit even at higher ohms. Rolled the 400 ss mesh tightly on the diagonal before torching to make an inverted "J" shaped wick down into the bottom of atty which safely holds a good 10+ drops of e-liquid. Been dripping exclusively with this setup a few weeks now and tried a 306 today on a whim ... nope ... I won't be vaping on 306s anymore!
Posted by Unknown on 29th Nov 2012
This is the first rebuildable I own so I can't compare its performance to other rebuildables. I really like it and would recommend it to others.
Posted by Todd on 20th Nov 2012
Love it! Hit like a champ out of the box, hits even better with the addition of SS mesh wick and a little polyfill or cotton at the bottom! Leaks a bit if I overfill, but what doesn't?
Posted by Mark on 12th Nov 2012
I was actually quite surprised when I received the Pegasus. Looks better than I thought it would and performs better than I thought it would. I mentioned that it performed well right out of the box...and this was with the pre installed wick and coil which tested at 4.1 Ohms! I've experienced no leaking which was my main concern. It's rebuildable so no problem adjusting the resistance of the coil. It's a nice looking and decent performing RBA for little $$$.
Posted by CC on 9th Nov 2012
I love this thing for the price it is well worth it. One of the few bottom feeding rbas out there. Works and fits awesome on the Reo! Rebuilt it with mesh wrapped around silica wick, it provides a nice smooth vape. Just a tad to airy but not to bad on the reo.
This will leak on a standard mod even using a sealed adapter. At least it did for me.
Posted by horseman9 (ECF) on 9th Nov 2012
I rewicked mine (hate the silica taste) with 100% organic cotton & made a 1.7 ohm coil. Works on my Reo, RSM's.
Posted by Kelly on 3rd Nov 2012
For an all stainless steel RBA I thought it would be heavier than it is, but it is quite light. I used it straight out of the package and it puts out tons of vapor, haven't had to rewick it yet. It looks super sweet on top of my provari with the mini cannon drip tip that DV sells.