Sorry, we are currenty out of stock.
Please check back with us soon.
Smoktech ARO Pyrex Glass BCC - Black
The ARO is a PYREX Glass bottom coil clearomizer tank by Smok Tech similar to the Larger Evod and MT3 but this is made with Pyrex. With the pyrex you can use any liquid without worrying if the tank will crack.
The ARO is eGo threaded to work with most eGo style batteries. These work very well on all the eGo series batteries, incuding the eGo Twist batteries, although in my initial experience it seems to be a bit stiff threading on.
The coil is at the bottom of the tank, providing a nice vapor, with a excellent flavor, and eliminates most wicking problems.
The ARO comes with :
1 x 2.0ml Tank Assembly with permanently attached Mouthpiece.
1 x Installed coil head @ 1.8ohm +/- .2ohm.
Replacement heads are here
How to fill the ARO :
The Top does NOT come off. Hold the ARO upside down, Unscrew the base, fill into the side do not get any liquid into the center hole, fill to just under the lip of the center hole. Screw the bottom back on and turn over, it will be full.
Replacing the coil on the ARO : Remove the base, then unscrew the coil from the base, replace with a new coil, screw it on the base, then screw the base on the ARO as normal.
This is a PYREX Clearomizer
Return Policy on ARO clearomizers:
If it is DOA it will be replaced, if not, it is not under any warranty, this type of clearomizer has replacable heads and replacable bases, if you run into an issue with an oring or coil after using it for a while you would need to purchase a replacement. This clearomizer is NOT covered for broken glass. Inspect your clearomizer when you receive it for cracks.
Whoa! I thought the eVods were good, this one out of the package is stellar! I absolutely LOVE it. It's very smooth and gives out good vapor and for a minute there I thought I had put in the wrong liquid, stunned really as my liquid tastes a bit different, not in a bad way either. Buy one, you won't regret it, the only issue is that is doesn't take Kanger coils, which isn't really an issue, you just need to make sure to get the ARO coils. (coming soon)