Vision 2.0 Clearomizer
Replaceable coil head eGo Clearomizer 2.4ohms
74mm fully assembled
You can change the cloi head easily, it's a screw off head.
This unit will accept ONLY Vision 2.0 Coil heads (link below)
You will receive: 1 x Vision 2.0 with 2.4ohm atomizer, assembled, includes base, tube, coil head and drip tip.
Posted by Derek on 7th Feb 2013
These give okay flavor, throat hit lacking, and the vapor is alright. Looking for something to replace my big vivi nova - this was not it.
I found quite a few dry hits (heavy vaper) at half a tank, expected it to be quite a bit lower before that happened. Also noticed on a Vamo the bottom would easily unscrew dumping liquid if I wasnt careful.
I found that on the three I purchased, they all had these issues in common. Used a ego-k battery, Vision spinner, and a Vamo (3.4-4v).
Posted by josh on 4th Feb 2013
i've tried several different atomizers and this is one of the best of its class. good flavor (with good liquid of course), durable, replaceable parts (especially heads for lower/higher ohmage when desired).
Posted by WagZ on 19th Jan 2013
Was looking for different tank set-ups, and thought I would give this a try. While the draw is a lot tighter than the Volcano Tube tank, and Vivi Nova mini, it help up to MBV's Cinnamon Ret Hot without cracking. On that note itself, I will order more of these.
Posted by Unknown on 14th Dec 2012
Good Vaper and Flavor
Does not Leak
Vapes 100% vg well
Filling could be a little easier
The Draw is a little tight for me. This could be a pro though. My girlfriend thinks it mimics a real cig better.
I have not had it totally break free but the tank can get a little out of wack where it fits into the base of the unit.It easy enough to press it back down when that happens though. So definatly would keep that in mind if you like to keep your ecig in your pants pocket. But I have been using these for about a month and have not had a leaking issue.
If you let it get real low on juice, like .2ml left in the tank sometimes you will have to twirl it around some to get a good hit.
Posted by Unknown on 1st Dec 2012
under heavy vaping I get dry hit occasionally but not a bad one if you light to moderate vaper it would probably do fine.
Posted by Nate on 30th Oct 2012
I like the fact that they are rebuildable. While they are an upgrade from other ce4 type clearomizers, I still experienced some leaking, and inconsistent vapes. Granted, the inconsistency could be attributed to a faulty head. I prefer the Kanger t2's flavor and vape over these.
Posted by Unknown on 27th Aug 2012
Vision 2.0 Rocks!!! Great vapor, Great flavor production, made from good Quality materials!!! I am buying more!!!
Posted by Larry on 26th Aug 2012
Very nice clearmizer.Smooth pull and good taste. No leaks and great price. Rebuildable, but yet have had to rebuild. Will buy more for all my juices. Thanks for the quick shipping Eric. Quality with Service
Posted by Brenda on 24th Aug 2012
I absolutley love this one. I am very pleased with the clearomizers I have tried. They vape awesome and there is little maintenance. I would recommend this product to anyone.
Posted by Josh on 18th Aug 2012
Perfectly vaping 100% vg! Been going a week strong without one burnt hit. Well worth the money along with top notch customer service.. a win win all the way..
Posted by Ed Langlois (RIVapor) on 16th Aug 2012
I have been vaping for nearly 2 years and I've tried everything from dripping, cartos' CE2 tanks, DCT tanks, and so on. This Vision 2.0 Clearomizer is amazing. I liked the CE4+ Ver 1 but this version is much improved. I like the fact that it is rebuildable and you can easily change out the coil head. It's very easy to clean, and refill. The longer wicks are better. I've been using this for about a week and haven't had any issues with leaking or dry hits. Tons of flavor and vapor everytime. The rechangeable coil heads are nice too as the ohms are cleary marked right on the head. This technology is everchanging and I'm always one to try new products. This is truely a product that they've perfected. I just ordered a few more along with some replacement heads. Keep these in stock Eric. This is a winner!
Posted by Darthvong from ECF on 14th Aug 2012
I have this, a mini nova and a standard nova. Personally, I use the Vision 2.0 the most. The head are replaceable and interchangeable with the other novas. These look good and work good.
Posted by Mikey on 12th Aug 2012
Finally a clearo that works well and doesn't leak it is one step above the thor and is head and shoulders above the kanger t2
Posted by Keith on 9th Aug 2012
I own 2 x 510s and EgoC Twist.
These bad boys arrived in record time to Ontario Canada, couldn't believe my eyes when I saw 'em in my mailbox so quickly!
Prepared one with my fav cigar blend and snapped her on the Ego and was vaping quick. WOW.
Great product, great service, great little finger-light gift for my lil' girl included at no charge (thank you!), I'm hooked.
For a lark, I tried her on my 510. Not as great as the Ego on various voltages but hey, if you buy one of these you're going to want to get a bigger batt than a 510 :)
I found airflow was better with the 510-Ego adapter.
Will be ordering more in the future!
Posted by Glen (buglen on ECF) on 8th Aug 2012
This and the Thor are absolutely a great step up from the previous CE4+ clearos that don't have changeable heads. It hits nice at about 3.8 to 4.0v with the 2.4ohm head, and the flavor is better than the other "Stardust" clearos on the market previously. If you're a fan of the CE4+ tank design, you're going to really love this update with the changeable coils.
If I hadn't already tried the Kanger T2 and CE3 and found them to be superb, I might give this and the Thor 5 star ratings.
Posted by Erik on 31st Jul 2012
I had doubts but once I used this I was impressed. Good solid device that does what it says. Easy to clean too.
Posted by RodeoGeorge on 24th Jul 2012
For me it's a toss up between this and the Kanger T2. The ONLY negative that I have is that the head tends to unscrew when the drip tip is unscrewed to fill. When I have occasion to disassemble for cleaning, I'll torque the head a bit more and see if this corrects that minor deficiency. For now, I just use forceps to screw it back down through the fill hole, and vape away.